Taurus I603MT Manuel De Instrucciones página 23

Suggested Pan dimensions for induction hob
The cooking zones are, up to a limit, automatically adapted to the diameter of the pan. However, the
bottom of this pan is suggested to have a minimum of diameter according to the corresponding
cooking zone. To obtain the best efficiency of your hob, please place the pan in the centre of the
cooking zone.
Base diameter of the pots:
Cooking zone Minimum (mm)
1
2
3
Using your Induction Hob
To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show "-" or "- -", indicating that the induction hob
has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
- Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
3. Select a heat setting by touching the "-" or "+" control of the cook zone.
- If you don't choose a heat setting within 1 minute, the Induction hob will automatically switch off. You
will need to start again at step 1.
- You can modify the heat setting at any time during cooking.
If the display flashes
This means that:
- you have not placed a pan on the correct cooking zone
- the pan you're using is not suitable for induction cooking
- the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed on it.
When you have finished cooking
1. Touching the "-" or "+" control that you wish to switch off.
2. Turn the cooking zone off by touching the "-" and scrolling down to "0".
Turn the whole cooktop off by touching the ON/OFF control.
4. Beware of hot surfaces
- 'H' will show which cooking zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. It can also be used as an energy saving function if you want to heat further
pans, use the hotplate that is still hot.
Using the Boost
Boost is the function that one zone rising to a larger power in one second and lasting for 5 minutes.
Thus, you can get a more powerful and faster cooking.
Using the Boost to get larger power:
1. Touch the "-" or "+" of the heating zone selection button that you wish to boost, an indicator next to
the key will flash.
2. Touch the Boost button, the heating zone will begin to work at Boost mode.
The power display will show "P" to indicate that the zone is boosting.
120
100
180
alternately with the heat setting