Suzuki 57100-0482 Serie Instrucciones Para El Montaje página 5

2. Slide the boot, loosen the lock-
nut of the throttle cable, and
tighten fully the adjuster. Then,
loosen the throttle cable.
3. Remove screws from the switch
box. First disconnect throttle
cable No.2, then No.1 with care,
and pull out the right side grip.
NOTE: Removed right side grip
will not be reused.
WARNING
Do not try to wrench off the
throttle cable No.1 and No.2
forcibly by using pliers or other
tools. The throttle cable may
be bent, causing improper
return of the throttle.
Boot Boot
Switch box
FWD
Throttle cable No.2
GENUINE SUZUKI ACCESSORIES
Lock-nut Lock-nut
Adjuster Adjuster
Throttle cable No.1
Right side grip
5/17