Connecting With The Musiccast Controller App (Registering The Unit As A Musiccast-Enabled Device) - Yamaha YAS-306 Manual De Instrucciones

Wireless network connections
Connect the unit to a wireless router (access point) to use a network.
Refer to the following for instructions on connecting to a wireless router (access point).
• Using the MusicCast CONTROLLER app (p.16)
• Applying iOS device (iPhone, etc.) settings to the unit (p.24 in the Owner's Manual)
Internet
Modem
Mobile device
The indicator on the unit glows when the unit is connected to a wireless network.
NOTE
• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
NETWORKS ➤ Connecting to a network
16
En
Wireless router (access point)
Glows (green)
Connecting with the MusicCast CONTROLLER app
(registering the unit as a MusicCast-enabled device)
Install the MusicCast CONTROLLER app on your mobile device to connect the unit to a
network and register it as a MusicCast-enabled device.
HINT
• Confirm that your mobile device is connected to your home router before beginning.
• This section uses MusicCast CONTROLLER app screens displayed in English on an iPhone as examples.
• MusicCast CONTROLLER app screens and menu labels are subject to change without prior notice.
1
Install the MusicCast CONTROLLER app on your mobile device, and
open the app.
Search for "MusicCast CONTROLLER" on the App Store or Google Play.
2
Tap "Setup".