Restoring Factory Settings - Hama 6in1 Instrucciones De Uso

7.4.2 Deleting all taught functions
1. Press and hold the [MUTE] and [VOL+] buttons simultaneously for approx.
3 sec. until the status LED lights up continuously.
2. Select the device you want to control using the device key ( e.g. [TV] ). A
successful selection is indicated by the LED with one ash followed by
permanent light.
3. Enter the code [9] [8] [2], the status LED ashes 2 times and then lights up
permanently again.
4. Press the [SETUP] button, the status LED ashes 4 times and all taught-in
functions are deleted.

8. Restoring factory settings

8.1 Press and hold the [SETUP] button for approx. 3 seconds until the status
LED lights up continuously.
8.2 Press the [MUTE] button. The status LED ashes once and then lights up
permanently.
8.3 Press the [0] button. The status LED ashes 4 times and the remote control
has been successfully reset to the factory settings.
Note
All set-up device settings and taught-in functions are deleted when resetting to
the factory settings.
9. Maintenance
• Never use old and new batteries in the universal remote control at the same
time, as old batteries tend to leak and can lead to a loss of performance.
• Never clean the universal remote control with scouring agents or harsh
cleaning agents.
• Keep the universal remote control free of dust by cleaning it with a dry soft
cloth.
11