Advanced Operation - KlipXtreme TwinBuds II Manual Del Usuario

4. Advanced operation

4.1. Pairing your earphones with a
mobile device
1. Turn both earphones on by pressing the
Multifunction button for about 4 seconds
on both sides simultaneously.
2. Set your Bluetooth
®
wireless earphone.
3. Place the phone and earphones within one
meter of each other.
4. The left and right earphones will pair
automatically. After both earphones have
synchronized with each other, the LED light
in one of them will blink slowly in blue and
the LED light in the other one will
alternatively blink red and blue to indicate
that it has entered into the pairing mode.
5. Select the KHS-705 earphone from the list of
newly discovered devices in your phone.
6. Accept by pressing Yes or OK on the
device. If prompted, enter the passkey 0000
(4 zeros). Your device will confirm when
pairing is complete.
7. The "Your device is connected" prompt will
be heard when the devices are able to
establish the wireless connection, and the
LED will change to blinking blue.
phone to "discover" the
8. If after 60 seconds the pairing process fails,
please repeat steps 1 through 6 as described
above.
9. The earphones will automatically go into
standby mode after a short period of
inactivity to save battery life.
10. You only need to pair the earphones with
your phone once, as they will re-pair
automatically.
11. The automatic re-pairing feature will allow
the earphones to be reconnected after being
switched back on or when placed again within
wireless range.
4.2. Call management using your
wireless earphones
• When there is an incoming call, your phone
will ring, the blue LED will blink once every 5
seconds, accompanied by a tone through your
earphones.
• Briefly press the Multifunction button on any
earphone to pick it up. You may also press the
answer button on your cellular phone to
receive the incoming communication in your
earphones.
Note: Audio will be out of both earphones.
• To end a call, simply press the Multifunction
button on any earphone once again.