Additional Switching Output; Connection For Window Contact Switch Aa 400 - Gaggenau AW 442 720 Instrucciones De Instalación

Ocultar thumbs Ver también para AW 442 720:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3
Fit the lower flue duct.
Gently bend the two side panels away from each
other, hook them in behind the upper flue duct, and
push them together as far as they will go.
Note: To prevent scratches, lay paper over the
edges of the lower flue duct to protect the surface.
4
Place the lower flue duct on the appliance.
5
Fit the grease filter.
18

Additional switching output

9
WARNING
Work must only be carried out on the additional
switching output by a qualified electrician in
accordance with the country-specific
requirements and standards.
The appliance has an additional switching output
X16 (potential-free contact) that can be used to connect
other appliances, such as a ventilation system that is
available at the installation site. The contact is closed
when the blower is switched on, and is opened when the
blower is switched off.
The switching output is located under a cover. Maximum
switching power 30 V/1 A (AC/DC). The signal that is
connected to the contact must correspond to class of
protection 3.
Connection for window contact switch
AA 400 510
Work on the connection for the window contact switch
must only be carried out by a qualified electrician in
accordance with the requirements and standards of the
country in which in the appliance is being used.
The appliance has a connection (X17) for a window
contact switch. The window contact switch can be flush
mounted or surface mounted. You will receive the
window contact switch AA 400 510 separately as an
accessory. Please observe the installation instructions
enclosed with the window contact switch.
If a window contact switch is connected, the extractor
hood's ventilation system will only work with the window
open. The lighting will work even if the window is
closed.
If you switch on the ventilation system with the window
closed, the button for the ventilation setting you have
selected will flash, and the ventilation system will not
switch on.
If you close the window while the ventilation system is
on, the appliance will switch the ventilation system off
within 5 seconds. The button for the ventilation setting
you have selected will flash.
The entire ventilation network and window contact
switch must be assessed by a master chimney sweep.
Tabla de contenido
loading

Este manual también es adecuado para:

Aw 442 760Ai 442 720Ai 442 760

Tabla de contenido