Features - Sony LMD-150 Manual De Instrucciones

Notes
• The LCD Monitor has a built-in cooling fan. If "FAN
ERROR (MEU)" or "FAN ERROR (LMD)" is
displayed on the screen, turn the power off and consult
with qualified Sony personnel.
• If a snowy picture appears when a computer signal is
input, change a value of the vertical refresh rate.
• Connect the MEU-WX1 with a serial number No.
2100001 and higher for the LMD-150/210. If the
MEU-WX1 with a lower serial number than No.
2100001 is connected for the LMD-150/210, no
picture is displayed on the screen.
• Changes in room temperature sometimes make the
cabinet expand or contract, causing a noise. This
does not indicate a malfunction.
Warning on power connection
Use a proper power cord for your local power supply.
The United States,
Canada
Plug type VM0233
Female end VM0089
Cord type SVT
Rated Voltage & Current 10A/125V
Safety approval UL/CSA
1)Use an appropriate rating plug which is applied to local regulations.

Features

The LMD-171W and the LMD-170W are a 17-type, the
LMD-230W is a 23-type and the LMD-320W is a 32-
type wide-screen LCD monitor, and the LMD-150 is a
15-type and the LMD-210 is a 21-type 4:3 LCD monitor.
High brightness LCD panel
Because of the monitor's high brightness, high contrast,
high speed response, and wide viewing angle
technology, it can be used under various lighting
conditions.
Rack mount monitors (LMD-150, LMD-
171W, LMD-170W and LMD-210 only)
The LMD-150/171W/170W/210 can be installed in a
standard 19-inch rack using each optional Mounting
Bracket MB-524, MB-522A or MB-523. This is
essential when space is paramount in crowded OB
vehicles.
Optional monitor stand with tilt function
The LMD-150/171W/170W/230W/210 can be installed
on the optional SU-558 monitor stand, and the LMD-
320W on the optional SU-559 floor stand. Thanks to the
tilt and height adjustment functions of the SU-558
monitor stand, the display screen height is adjustable to
position with other equipment.
Lightweight, thin design
The lightweight, thin design reduces the load for an OB
vehicle and the space needed for installation.
3-color tally lamp (except for the LMD-
320W)
The tally lamp lights in red, green or amber to monitor
each input picture and check the on-air mode.
Continental Europe UK, Ireland,
Australia, New
Zealand
1)
COX-07/636 –
COX-02/VM0310B VM0303B
H05VV-F CEE (13) 53rd (O,C)
10A/250V 10A/250V
VDE VDE
Japan
YP332
YC-13
VCTF
7A/125V
DENAN
5
GB
Features