NuWave Brio 14Q El Manual Del Propietario página 15

Note: If the wattage is changed from 1800W to either 900W or 1500W
and the Brio is unplugged, the unit will remember the last wattage
setting when plugged back in and turned on.
DELAY
Delay function is used to delay your cooking start time.
1. Press ON/OFF. Press the up or down arrows to adjust your
temperature and time.
2. Press DELAY.
3. Press the up or down arrows
to adjust the delay time. Delay
time can be adjusted up to 24
hours (24:00).
• During delay, the (:) will
flash, indicating the delay
time countdown has started.
• Delay time can be increased or decreased by pressing up or
down arrows during the delay cycle.
4. To stop the Delay function at any time, press DELAY. The unit will
end the delay cycle and move on to the next cooking function.
• After delay time has elapsed, the unit will automatically move
on to the next cooking function.
5. Once the Brio finishes cooking your food, End will be displayed
and the unit will beep three times.
TEMP
1. Press TEMP to see or adjust
your cooking temperature.
• Temperature can be adjusted
higher or lower by pressing
the up or down arrows.
2. Press START/PAUSE
to begin cooking at
set temperature.
• Temperature can be adjusted during cooking by pressing
TEMP. Press up or down arrows to adjust temperature.
TIME
1. Press TIME to see or adjust
cooking time.
• Time can be adjusted
by pressing the up or
down arrows.
:
0 1 00
1800
360F
1800
:
00 15
1800
nuwavenow.com nuwavenow.com
15 15