Rotisserie Basket Assembly
To assemble the Rotisserie Basket into the Brio, follow the steps and
illustrations below:
1.
Remove top lid from Rotisserie
Basket: Squeeze prongs on top of top
lid toward middle and lift up. Remove
tab from side.
2.
Place food in Basket.
3.
Adjust top lid to fit over food: Place
tab on side of lid into slot above
where top of food ends. Squeeze
prongs on top of Lid and slide down
into position and place prongs into
correct position.
• Position of prongs should be lined
up and opposite of tab on other side.
• Make sure top lid lies flat on food
and fit is snug.
4.
After food has been inserted in
Basket and top lid has been adjusted,
place rectangular end of assembled
Rotisserie Basket into the Shaft
Support Hole. Insert other end of
Rotisserie Basket (skewer) into the
Shaft Bracket.
Notes:
• Always check that there is sufficient space above and below food
so it can rotate freely without obstruction.
• When using Rotisserie Basket, place Drip Tray on the bottom.
Rotisserie Basket parts will be hot during and after use.
CAUTION
Use oven mitts.
nuwavenow.com
nuwavenow.com
900
1500
1800
11
11