Cleaning Your Mask - ResMed AirFit N30 Guia Del Usuario

1. With the gray side of the headgear facing out, insert each end of the
headgear band over the stabilizers through the buttonholes.
2. Secure the headgear by pulling the buttonholes over the ends of the
stabilizers.
3. Holding the mask frame, stretch the headgear lightly to ensure it is
securely attached. Ensure that the headgear band is not twisted.
4. Align the notch in the cushion to the tab on the mask frame. Firmly
push one side of the cushion onto the frame, then repeat on the other
side. Push down all the edges of the cushion onto the frame to ensure
that the edges are completely flat.
5. Connect the AirMini tubing to the vent module by pushing the ends
together and twisting until it locks in place.
6. To add optional humidification, insert the HumidX/HumidX Plus into
the vent module. Connect the mask tubing to the vent module by
pushing the ends together and twisting until it locks in place.

Cleaning your mask

Follow the cleaning instructions in this guide to maintain performance and
safety of the mask.
WARNING
• Regularly clean your mask and components to receive optimal
therapy and to prevent the growth of germs that can adversely
affect your health.
• Regularly inspect the HumidX/HumidX Plus and follow the
cleaning and maintenance instructions to prevent the growth of
germs that can adversely affect your health.
• Always follow cleaning instructions and only use a mild liquid
detergent. Some cleaning products may damage the mask, its
parts and their function, or leave harmful residual vapors that
could be inhaled if not rinsed thoroughly. Do not use a dish
washer or washing machine to clean your mask.
8