De Dietrich DHG7501X Instrucciones De Uso Y De Montaje página 12

Ocultar thumbs Ver también para DHG7501X:
Idiomas disponibles
  • ES

Idiomas disponibles

WARNINGS
Before installing the appliance,
make sure that none of the parts
is damaged in any way. In case
of damaged parts, contact your
retailer and do not proceed with
installation.
Read all of the following instruc-
tions with care before installing
the appliance.
- Use an air outlet pipe of the
shortest possible length.
- Limit the number of pipe bends.
- Use a material approved by
standards and regulations.
- Avoid any sudden changes in
pipe section (recommended con-
stant diameter: 150 mm or equal
surface area).
* The appliance is not intended
for use by young children or
infirm persons without super-
vision. Young children should
be supervised to ensure they
do not play with the appliance.
* The cooker surface and the
inferior part of the cooker hood
must be at a minimun distance
of 65 cm.
* The air sucked can't be con-
veyed through or into a duct
used to let out fumes from ap-
pliances fed by energy other
than electric power (eg. centra-
lized heating, radiators, water-
heaters, etc.).
* To evacuate the air outlet,
please comply with the pertai
ning rules given by competent
authorities.
* Provide the room with an ade-
quate aeration when a cooker
hood and appliances fed by
energy other than electric power
(gas-, oil-, or coal- stoves, etc.)
are used simultaneously. The
cooker hood, when evacuating
the sucked air, could generate a
negative pressure in the room-
which can't exceed the limit of
0.04 mbar, in order to avoid the
suck of exhausts deriving from
the heat-source. Therefore the
room should be provided with air-
intakes to allow a costant flow of
fresh air.
*
When
performing
connections
se
make
sure
provided
with
that
voltage
those
indicated
inside
the
appliance
*
Before
carrying
ning
or
maintaining
the
appliance
ved
from
the
appliance
is
non-separable
12
the
electrical
on
the
appliance,
that
the
current-tap
earth
connection
values
correspond
on
the
label
itself.
out
any
operations,
needs
to
be
electric
grid.
not
provided
flexible
cable
and
plea-
is
and
to
placed
clea-
remo-
If
the
with
a
plug,
loading