Taking Pictures - FujiFilm Instax Mini 11 Manual De Instrucciones

Taking Pictures

EN
Do not open the back cover until you have used up the
film. Otherwise, the rest of the film will become exposed
and turn white, and can no longer be used.
1
Once the batteries are loaded, press the power
button to turn the camera on.
The lens barrel extends and the flash charging lamp
blinks and then lights up. (Blinking indicates that the
flash is charging.)
2
Hold the camera, look through the viewfinder
of the camera to frame your desired
composition, and press the shutter button.
* The shutter button cannot be pressed while the
flash is charging.
10
3
When the sound of the film being ejected
stops, grasp the edge of the ejected film and
take the film out.
The film counter decreases in numerical order,
counting down from "10" with each photo taken. "0"
will be displayed when the film is finished and after
the last photo has been taken.
4
When you have finished taking photos, turn off
the camera by pushing the lens barrel back in.
If the camera malfunctions, remove the batteries while
the power is on and then reinsert them to reset the
camera.