To Examine The Spark Plug; To Apply Air Filter Oil To The Air Filter; To Clean The Air Filter - Husqvarna 325L Manual Del Usuario

To examine the spark plug

CAUTION: Use the recommended spark
plug. Make sure that the replacement is the
same as the manufacturer supplied part. An
incorrect spark plug can cause damage to
the product.
1. Examine the spark plug when:
a) the engine is low on power.
b) the engine is not easy to start.
c) the engine does not operate correctly at idle
speed.
2. If, the engine is not easy to start or operate, examine
the spark plug for unwanted materials. To decrease
the risk of unwanted material on the spark plug
electrodes:
a) make sure that the idle speed is correctly
adjusted.
b) make sure that the fuel mixture is correct.
c) make sure that the air filter is clean.
3. Clean the spark plug if it is dirty. Examine that the
electrode gap is correct.
4. Replace the spark plug when it is necessary.
To do the maintenance to the air
filter

To clean the air filter

16
1. Remove the air filter cover and remove the air filter.
2. Clean the air filter with warm soap water. Make sure
3. Replace the air filter if it is too dirty to fully clean it.
4. If your product has a foam air filter, apply air filter oil.

To apply air filter oil to the air filter

0,5 mm
1. Remove the air filter cover and remove the air filter.
2. Put the air filter in a plastic bag.
that the air filter is dry before you install it.
Always replace a damaged air filter.
Only apply air filter oil to a foam filter. Do not apply
oil to a felt filter.
CAUTION: Always use special air filter oil on
foam air filters. Do not use other types of oil.
WARNING: Do not get oil on your body.
882 - 001 - 10.10.2018