ENGLISH
If the POWECOMMAND line feed still does not work or
the spool is jammed, try the following suggestions:
Carefully clean the spool and housing.
Remove the spool and check if the lever in the spool
housing can move freely.
Remove the spool and unwind the cutting line,
then wind it on neatly again. Replace the spool into
the housing.
Maintenance
Your BLACK+DECKER corded/cordless machine/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool/machine care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the machine/tool.
Or switch off and remove the battery from the machine/
tool if the machine/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
switch off.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your tool/machine
and charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Regularly clean the cutting line and spool using a soft
brush or dry cloth.
Regularly use a blunt scraper to remove grass and dirt
from the underneath of the guard.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
BESTE625
Type 1
Voltage
V
230
AC
Power Input
W
450
No-Load Speed
min
7500
-1
12
(Original instructions)
BESTE628
BESTE630
Type 1
Type 1
230
230
550
550
7500
7500
BESTE625
Type 1
Weight
kg
2.5
BESTE625 Level of sound pressure:
Sound pressure (L
) 80 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 93 dB(A), uncertainty (K) 2.6 dB(A)
WA
BESTE625 Vibration total values (triax vector sum) according to EN 50636-2-91:
Vibration emission value (a
) 4.4 m/s
, uncertainty (K) 1.7 m/s
2
h
BESTE628 Level of sound pressure:
Sound pressure (L
) 81 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 94 dB(A), uncertainty (K) 1.1 dB(A)
WA
BESTE628 Vibration total values (triax vector sum) according to EN 50636-2-91:
Vibration emission value (a
) 4.7 m/s
, uncertainty (K) 1.7 m/s
2
h
BESTE630 Level of sound pressure:
Sound pressure (L
) 80 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 93 dB(A), uncertainty (K) 2.6 dB(A)
WA
BESTE630 Vibration total values (triax vector sum) according to EN 50636-2-91:
Vibration emission value (a
) 4.9 m/s
, uncertainty (K) 1.7 m/s
2
h
EC declaration of conformity
MACHINERY DIRECTIVE
%
OUTDOOR NOISE DIRECTIVE
BESTE625, BESTE628, BESTE630 - Trimmer
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN60335-1:2012 +A11:2014,
EN 50636-2-91:2014
2000/14/EC, Lawn Trimmer, L ≤ 50 cm, Annex VI
DEKRA Certification B.V. Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM, Netherlands
Notified Body ID No.: 0344
Level of accoustic power according to 2000/14/EC
(Article 12, Annex III, L ≤ 50 cm):
BESTE628
BESTE630
Type 1
Type 1
2.5
2.5
2
2
2