Always Use Common Sense; General Safety Instructions - Husqvarna 520iLX Manual Del Usuario

moment of inattention while operating power tools
may result in serious personal injury.
• This appliance is not intended for use by person
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.
• Never allow children or other persons not trained in
the use of the product and/or the battery to use or
service it. Local laws may regulate the age of the
user.
• Store the equipment in a lockable area so that it is
out of reach of children and unauthorized persons.
• Keep hands and feet away from the cutting area at
all times and especially when switching on the
motor.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
• Wear personal protective equipment. See
instructions under the "Personal protective
equipment" heading.
• Always use face or dust mask if operation is dusty.
• Turn off the product when it has to be moved.
Always remove the battery when passing the
machine to another person.
• Keep in mind that it is you, the operator that is
responsible for not exposing people or their property
to accidents or hazards.
• The transport guard must always be used for storage
and transport.
Power tool use and care
• The only accessories you can operate with this
product are the cutting attachments we recommend
in the technical data chapter.
• Never use a product that has been modified in any
way from its original specification. Never use the
product near explosive or flammable materials.
• Never use a product that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the
Maintenance heading.
• Only use original spare parts.
• Always ensure that ventilation openings are kept
clear of debris.
• Keep handles dry, clean and free from oil and
grease.
• All covers, guards and handles must be fitted before
starting.
• Only use the machine in daylight or in other well-lit
conditions.
756 - 001 - 24.10.2018
• Do not overreach. Keep proper footing and balance
at all times.
• Don't force the product. It will do the job better and
with less likelihood of injury at the rate for which it
was designed.
• Working in bad weather is tiring and often brings
added risk. It is not recommended to use the product
in very bad weather, for instance, in dense fog, in
heavy rain, strong winds, intense cold, risk of
lightning.
• If the product starts vibrating abnormally, stop the
product and remove the battery.
• Avoid Unintentional Starting – Don't carry appliance
with finger on switch.
• Store Idle Appliances Indoors – When not in use,
appliances should be stored indoors
• Walk, never run.

Always use common sense

It is not possible to cover every conceivable situation
you can face. Always exercise care and use your
common sense. Avoid all situations which you consider
to be beyond your capability. If you still feel uncertain
about operating procedures after reading these
instructions, you should consult an expert before
continuing.
WARNING: Never allow children to use or
be in the vicinity of the machine. Since the
machine is easy to start, children may be
able to start it if they are not kept under full
surveillance. This can mean a risk of serious
personal injury. Therefore disconnect the
battery when the machine is not under close
supervision.

General safety instructions

WARNING: Read the warning instructions
that follow before you use the product.
• Remove the battery to prevent the product from
being started by accident.
• This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others.
• Do not use the product if it is changed from its initial
specification. Do not change a part of the product
without approval from the manufacturer. Only use
parts that are approved by the manufacturer. Injury
or death is a possible result of incorrect
maintenance.
• Do a check of the product before use. See,
devices on the product on page 8 and
Maintenance on page 14 . Do not use a defective
product. Do the safety checks, maintenance and
service instructions described in this manual.
Safety
5