INSTRUCTIONS
WINDING CROWN
The winding crown is used to manually wind the
watch (position 1) and to set the time (position 2).
WINDING
Your watch incorporates a self-winding movement.
The movements of your wrist set a centrifugal mass
in motion; this tensions the mainspring, which stores
the energy. When you take off your fully wound
watch, it will continue to run for at least 35 hours.
When it has stopped after depleting the power
reserve, it can be rewound by hand (about 10 clock-
wise turns of the crown).
Your complicated self-winding wristwatch was pre-
sented to you in a case with a winder. If you do not
intend to wear your watch for a longer period of
time, please return it to the case where the constant
motion of the winder will keep it wound. By using
the winder, you can eliminate the need to reset the
calendar when you put on your watch again.
SETTING THE TIME
To set the time, gently pull the crown all the way
out and move the hands in either direction. Once
you have set the correct time, push the crown home
again. When you turn the hands clockwise beyond
midnight, the calendar displays will advance as
well. We advise against turning the hands coun-
terclockwise across midnight because this would
desynchronize the calendar displays; however, it
would not damage the calendar mechanism.
8