Setting The Time - Patek Philippe CALIBERS 240 Manual Del Usuario

Ocultar thumbs Ver también para CALIBERS 240:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
INSTRUCTIONS
WINDING CROWN
The winding crown is used to manually wind the
watch (position 1) and to set the time (position 2).
WINDING
Your watch incorporates a self-winding movement.
The movements of your wrist set a centrifugal mass
in motion; this tensions the mainspring, which stores
the energy. When you take off your fully wound
watch, it will continue to run for at least 48 hours.

SETTING THE TIME

To set the time, gently pull the crown all the way
out and move the hands in either direction. Once
you have set the correct time, push the crown home
again.
10
CAUTION
Please wind the watch and set the time before
you put the watch on. This prevents lateral
pressure on the winding stem. Please use
your fingernails to pull the crown out and
turn it gently between two fingertips.
Never pull out the crown in a humid envi-
ronment or underwater: the water resist-
ance of your watch is assured only when
the crown is pushed home.
If your watch has stopped running, rewind
it by hand before performing any correc-
tions or adjustments (about 10 clockwise
turns of the crown).
11
Tabla de contenido
loading

Este manual también es adecuado para:

Calibers 240 squ

Tabla de contenido