Cleaning For Prolonged Deactivation - MBM PRQ7 T Serie Manual De Uso E Instalación

off (see procedure part 3 Instructions for
use: Switching On/Off).
DAILY OVEN CLEANING
D e p e n d i n g o n t h e
appliance, remove: grills,
trays or other objects
removed from the cooking
compartment.
Heat up the cooking compartment for
about 20'. Open the door to let the cooking
compartment cool off for a few seconds.
Use a standard sprayer to apply the liquid
detergent on the whole surface of the
cooking compartment and, using a non-
abrasive sponge, clean the entire surface
thoroughly by hand.
When finished, rinse the cooking
compartment abundantly with tap water
(do not use pressurised direct water
or steam cleaners jets for cleaning
operations).
When these operations have been
performed successfully, dry the cooking
compartment carefully using a non-
abrasive cloth.
If necessary, repeat the operations
described above for a new cleaning cycle.
Clean the parts previously removed
from the cooking compartment (grills,
trays and other removable objects) with
detergent and tap water, rinse them
carefully and dry them before putting
them back. In order to eliminate all
humidity, once routine cleaning has been
finished, turn the appliance on and run it
at minimum for approximately 20' and then
turn it back off (see chap. Instructions for
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
use / Switching On/Off).
CLEANING FOR PROLONGED
DEACTIVATION /
To conclude the operations see chap.
5 / Operations for commissioning /
Prolonged decommissioning
Air out the appliances and rooms
regularly.
SUMMARISED TABLE /
OPERATION - FREQUENCY
Before proceeding with the
operations, see chap.2 "Duties
and qualifications"
Should a problem occur, the ge-
neric operator performs the first
search and, if qualified, elimina-
tes the cause of the problem and re-
stores the appliance correctly.
If the problem cannot be resol-
ved, turn the appliance off, di-
sconnect it from the electrical mains
and shut all the supply valves. Then
contact authorized customer service.
The authorized maintenance te-
chnician intervenes when the
generic operator was not able to pin-
point the cause of the problem, or
whenever restoration of correct ope-
ration of the appliance entails execu-
ting operations for which the generic
operator is not qualified.
If the power cable is damaged,
contact the authorised techni-
cal assistance service to have
it replaced.
- 17 -
MAINTENANCE
8.
EN