Tabla de contenido
Idiomas disponibles
Idiomas disponibles
VERTICAL STEAMING
Steam wrinkles from hanging clothes, hanging curtains, and
upholstery.
Set the temperature control to max.
1.
2.
Hold the iron vertically, close to (but not touching) the
fabric.
3.
Press the
4.
Leave 4 seconds between shots, to let the temperature build up.
AFTER USE
1.
Set the temperature control to min.
2.
Unplug the base.
3.
Open the water inlet cover.
4.
Hold the iron over a sink, turn it upside down, and drain
the water from the water tank. (E)
5.
Place the iron on the base and leave it to cool down
completely.
6.
When cold, wipe off any moisture, and close the water
inlet cover.
7.
Wipe outer surfaces with a damp cloth.
8.
Remove spots from the soleplate with a little vinegar.
Take care not to scratch it.
9.
Wrap and secure cord with hook-and-loop cord wrap. (F)
SELF CLEAN
To avoid scale build-up, use the self clean function monthly in normal water
areas, more often in hard water areas.
Fill the water tank to the max mark.
1.
2.
Set the temperature control to max.
3.
Sit the iron on the base.
4.
Plug in the base and wait until the smart status light flashes green.
5.
Hold the iron over a sink with the soleplate down.
6.
Move the steam control past
7.
Gently move the iron back and forth, over the sink.
8.
When water and steam stop coming from the soleplate, release the
steam control lever.
9.
Follow the steps under AFTER USE.
AUTO SHUT-OFF
1.
If the iron is motionless for about 8 minutes it will switch off.
2.
The smart status light will slowly pulse red.
3.
To switch on again, lift it off the base then return it to allow it to heat
up again. Iron is heated once the smart status light flashes green.
button. (D)
to
and hold it there.
7
D
E
F
Tabla de contenido
