Installing The Pneumatic System - Festo DHTG Instrucciones De Utilizacion

DHTG
• Fasten the blank plate with 6 screws and 2 centring pins.
After fitting, the 6 screw recesses can be sealed with the cover caps supplied (press in until flush).
Blank plate mounting
Size
Screw
Locating hole
for centring pin
Tightening torque
Tab. 3
5.2

Installing the pneumatic system

• Connect the pneumatic ports A to D (if applicable remove sealing elements).
Clockwise or anti-clockwise rotation
Size
Connection A
Connection B
Connecting thread
Tightening torque
Tab. 4
Reciprocating operation
Size
Connection A
Connection B
Connection C
Connection D
Connecting thread
Tightening torque
1) Separate kit required
2) Use external flow control valve
Tab. 5
Festo – DHTG – 1303c English
65 90
M4 M4
[mm] 4 4
[Nm] 2.9 2.9
65 90
Unlock and turn
Lock and return stroke
M5
1.5 Nm
1)
65 90
Unlock
Lock
Clockwise rotation
Anti-clockwise rotation
M5
1.5 Nm
140 220
M6 M8
5 6
9.9 24
Fig. 5
140 220
Gx
7 Nm
Fig. 6
140 220
2)
Gx
7 Nm
(D)
Fig. 7
(B) (A)
(C) (B) (A)
25