Craftsman CMXGWFN061113 Manual De Instructiones página 9

• Materials placed
against or near the
pressure washer can
interfere with its
proper ventilation
features causing
overheating and
possible ignition of
the materials.
• Muffler exhaust heat
can damage painted
surfaces, melt any
material sensitive to
heat (such as siding,
plastic, rubber, vinyl
or the pressure hose,
itself ), and damage
live plants.
• Improperly stored
fuel could lead to
accidental ignition.
Fuel improperly
secured could get
into the hands of
children or other
unqualified persons.
• Use of acids, toxic or
corrosive chemicals,
poisons, insecticides,
or any kind of
flammable solvent
with this product
could result in serious
injury or death.

DANGER: RISK TO BREATHING (ASPHYXIATION
WhAT CAN hAPPEN
• Breathing exhaust
fumes will cause
serious injury or
death! Engine
exhaust contains
carbon monoxide,
an odorless and
deadly gas.
• Some cleaning fluids
contain substances
which could cause
injury to skin, eyes
or lungs.
• Never operate pressure
washer in an area
containing dry brush
or weeds.
• Always keep pressure
washer a minimum of
4' (1.2 m) away from
surfaces (such as houses,
automobiles or live plants)
that could be damaged
from muffler exhaust heat.
• Store fuel in an OSHA
approved container, in a
secure location away from
work area.
• Do not spray
flammable liquids.
hOW TO PREVENT iT
• Operate pressure washer
in a well-ventilated area.
Avoid enclosed areas such
as garages, basements, etc.
• Never operate unit in or
near a location occupied by
humans or animals.
• Use only cleaning fluids
specifically recommended
for high pressure washers.
Follow manufacturers
recommendations. Do not
use chlorine bleach or any
other corrosive compound.

DANGER: RISK OF FLUID INJECTION AND
LACERATION
WhAT CAN hAPPEN
• Your pressure
washer operates
at fluid pressures
and velocities high
enough to penetrate
human and animal
flesh which could
result in amputation
or other serious
injury. Leaks caused
by loose fittings or
worn or damaged
hoses can result in
injection injuries.
DO NOT TREAT
FLUID INJECTION
AS A SIMPLE CUT!
See a physician
immediately!
• Injuries can result
if system pressure
is not reduced
before attempting
maintenance
or disassembly.
ENgLish
hOW TO PREVENT iT
• Inspect the high pressure
hose regularly. Replace the
hose immediately if it is
damaged, worn, has melted
from contacting the engine,
or shows any signs of
cracks, bubbles, pinholes, or
other leakage. Never grasp
a high pressure hose that is
leaking or damaged.
• Never touch, grasp or
attempt to cover a pinhole
or similar water leak on the
high pressure hose. The
stream of water IS under
high pressure and WILL
penetrate skin.
• Never place hands in front
of nozzle.
• Direct spray away from self
and others.
• Make sure hose and fittings
are tightened and in good
condition. Never hold
onto the hose or fittings
during operation.
• Do not allow hose to
contact muffler.
• Never attach or remove
wand or hose fittings while
system is pressurized.
• When using replacement
lances or guns with this
pressure washer, do not use
a lance and/or lance/gun
combination that is shorter
in length than what was
provided with this pressure
washer as measured from
the nozzle end of the lance
to the gun trigger.
• To relieve system pressure,
shut off engine, turn off
water supply and pull
gun trigger until water
stops flowing.
• Use only accessories
rated equal to or higher
than the rating of the
pressure washer.
7