Training Pet - Petsafe HPA11-10876 Guia De Instalacion

In Doors and Walls Greater Than 2 ¼" (57 mm) Thick
4D
4E
Screw
Clips
4F
Step 5

Training Pet

5A
8
4D. Remove the interior frame cover from the interior frame by
removing the screws (these screws will not be used in doors and
walls greater than 2 ¼" (57 mm) thick) and unsnapping the snaps,
starting with the snaps closest to the top on each side.
4E. Place interior frame in hole and attach to wall through hole in
metal screw clips with appropriate fastener based on the material
of your wall (may require fasteners not provided).
4F. Reattach interior frame cover by snapping it in place. Insert
the bottom hooks of the frame cover first and then rotate it into
place. Then attach exterior frame with appropriate fastener
based on the material of your wall (may require fasteners
not provided).
5A. Rehang your door and begin training your pet. It may help for you
to be on one side of the door and your pet on the other. Lift or
tape open flap and try to talk your pet through the pet door. After
your pet has gone through a few times, allow the flap to touch
your pet's back so they will become comfortable using the pet
door. If your pet will not go through the door, tape the flap open
until they use it on their own. Do not use the 4-way lock until your
pet is familiar with using the pet door.
Helpful Tip: Try treats or toys to encourage your pet to go through
the pet door and become comfortable using it.
Customer Care Center 1-800-732-2677