Setting The Alarm - Hama TH-100 Instrucciones De Uso

4. Getting Started
Inserting the battery
• Open the battery compartment
(7), remove the contact breaker
and then close the battery
compartment (7). The
thermometer is now ready for use.
Replacing the batteries
• If the display (1) becomes
dimmer, you must replace the
battery.
• When inserting the batteries,
ensure that the polarity is correct
(+ to the top, – to the bottom).
5. Operation
• Press the MODE button (3) to
switch between the three display
modes available. The modes are
as follows (in that order): clock,
alarm, calendar.
Note
• The product is usually in
clock mode. If the product
is in another mode, press the
MODE button (3) until it is in
the mode you want.
• When you adjust the settings,
the selected item will flash to
indicate that it can be set.
5.1 Setting the time format/time
• In clock mode, press and hold
the SET button (5) for about 2
seconds to start setting the time:
1. 12/24 hour format
2. Hours
3. Minutes
• Press the ADJUST button (4) to
select the individual values.
• Press the SET button (5) to adopt
the set value displayed and skip
to the next item.
• Press the MODE button (3) to
save the settings and return to the
normal display.

5.2 Setting the alarm

• In alarm mode, press and hold
the SET button (5) for about 2
seconds to start setting the alarm:
1. Hours
2. Minutes
• Press the ADJUST button (4) to
select the individual values.
• Press the SET button (5) to adopt
the set value displayed and skip
to the next item.
• Press the MODE button (3) to
save the settings and return to the
normal display.
5.3 Setting the calendar
• In calendar mode, press and
hold the SET button (5) for about
2 seconds to start setting the
calendar:
1. Year
2. Month
3. Day
• Press the ADJUST button (4) to
select the individual values.
• Press the SET button (5) to adopt
the set value displayed and skip
to the next item.
3