BOMBILLA LUZ DE POSICIÓN
•
Quitar la goma de cierre (8).
•
Sujetar el portalámparas de luz
de posición (9), tirar de él y ex-
traerlo de su alojamiento.
•
Sacar la bombilla (10) y susti-
tuirla por una del mismo mode-
lo.
•
Volver a montar el portalámpa-
ras (9) en su alojamiento y la
04_32
goma de cierre (8).
Regulación proyector (04_33,
04_34, 04_35)
NOTA
EN FUNCIÓN DE LO PREVISTO POR
LA LEGISLACIÓN EN VIGENCIA EN
EL PAÍS DONDE SE UTILICE EL VEHÍ-
CULO, PARA EL CONTROL DE LA
ORIENTACIÓN DEL HAZ LUMINOSO
SE DEBEN ADOPTAR PROCEDIMIEN-
04_33
TOS ESPECÍFICOS.
126
TAIL LIGHT BULB
•
Remove the rubber seal (8).
•
Pull out the tail light bulb holder
(9) from its seat.
•
Remove the bulb (10) and re-
place it with another of the same
type.
•
Reinstall the bulb holder (9) in its
seat and install the rubber seal
(8).
Headlight adjustment (04_33,
04_34, 04_35)
NOTE
IN COMPLIANCE WITH LOCAL LEGAL
REQUIREMENTS, SPECIFIC PROCE-
DURES MUST BE FOLLOWED WHEN
CHECKING LIGHT BEAM ADJUST-
MENT.