Festo CMMP−AS Manual Del Usario página 25

Index
Main Sub
index index
28 x
30 x
31 x
32 x
33 x
34 x
35 x
36 x
37/38 x
40 x
42 x
43 x
45 x
Festo P.BE−K−CMMP−AS 0708NH English
Error message Error message
Operating time
counter
Internal conversion
fault
2
I T−fault
Intermediate circuit
Drag error in encoder
emulation
Synchronization fault
in field bus
Protection against
slipping of linear
motor
Parameter fault
SERCOS field bus
Software end position Check target data and posi
Fault in positioning
Fault in end switch
Driver supply
Cause/ Cause/
Measures Measures
Acknowledge fault If fault
occurs again, contact
technical support
Internal fault
Mechanic part blocked, check
application
Check installation
Please contact technical
support.
No synchronization messages
from the master
Sensor signals are faulty
Check the installation
Check user parameter record
Please read the SERCOS
manual and contact technical
support
tioning range
Check parameter records
Check parametrizing, wiring
and end switch
Please contact technical
support.
25