Product Description; Intended Use - Oase OxyMax 100 Instrucciones De Uso Y Garantía

- EN -
the electrical cord. A minor cut even if only in the outer shell could allow
water to reach the motor enclosure and damage the pump. If you notice
any damage to the cord remove the pump and store in a dry place.
Consult any damage to the electrical cord will void all warranties and
could cause serious electrical shock hazard.
• To avoid the possibility of the appliance plug getting wet prevent water
from dripping onto plug. A "drip loop," shown in the figure below, should
be arranged by the user for each cord connecting an aquarium appliance
to a receptacle. The "drip loop" is that part of the cord below the level
of the receptacle, or the connector if an extension cord is used, to
prevent water traveling along the cord and coming in contact with the
receptacle.
SAVE THESE INSTRUCTIONS!
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST,
Monday-Friday, or email us at [email protected]. Or visit our
website at www.oase-livingwater.com
4
OxyMax 100/200/400
Warnings used in these instructions
NOTE
Indicates information intended to give the user a better understanding.
CAUTION
!
• Indicates a possibly hazardous situation.
• Non-observance may lead to slight or minor injuries.
Cross-references used in these instructions
A Reference to a figure, e.g. Fig. A.
→ Reference to another section.

PRODUCT DESCRIPTION

Intended use

OxyMax 100/200/400, referred to in the following as "unit", may only be used as
specified in the following:
• For aeration and supplying oxygen to an aquarium.
• Operation under observance of the technical data
The following restrictions apply to the unit:
• Only use indoors and outside of the aquarium.
• Do not use for commercial or industrial purposes.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive
substances.
- EN -
5