G.finding The Max/Min Value; H.auto-Power-Off; Specifications - koban KPF-04 Manual Del Usuario

KPF-04
E. Peak Value Hold
The Peak Hold function captures the peak AC or DC voltage or AC current. The
meter can capture negative or positive peaks as fast as 10 millisecond in duration.
F.Holding the LCD Reading
Press the HOLD button, then the reading shall be hold and kept on LCD.

G.Finding the MAX/MIN Value

Press the MAX/MIN button to enable the maximum and minimum values to be
recorded and updated during measurement. Push the button once, the maximum
value shall be displayed and updated. Push again (second push ), the minimum
value shall be displayed. Push again(third push), MAX/MIN function shall be
disabled and return to the normal measurement mode.
H. Auto-Power-Off
The meter will turn itself off 30 minutes after power-on. To turn it on again.

4.Specifications

AC current:
Range Resolution
200mA 100uA
2A 1mA
20A 10mA
200A1 100mA
1000A1 100mA
AC/DC Voltage( input impedance:10MΩ)
Range
Resolution
600V
0.1V
Accuracy
50/60 Hz
±1.5%±6dgts
±2.0%±6dgts
±2.0%±6dgts
±2.0%±6dgts
±3.0%±6dgts
50/60Hz
40-1KHz
±1.5%±2dgts
±2.0%±4dgts
EN
Wide(40-1KHz)
±3.0%±6d gts
±4.0%±6d gts
±4.0%±6d gts
±3.0%±6d gts
±7.0%±6d gts
Overload
protection
AC/DC
600V
13