Technical Data - Vega VEGAWAVE S 61 Instrucción De Servicio

8 Supplement

8.1 Technical data

General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
- Tuning fork
- Process fitting
- Tube extension
- Process seal
Materials, non-wetted parts
- Housing
- Seal ring (housing/hous-
ing cover)
- Ground terminal
Weights
Max. lateral load
Output variable
Relay output
- Turn-on voltage
- Switching current
- Breaking capacity
- Contact material
- Instruction
Transistor output
- Turn-on voltage
- Switching current
- Blocking current
Modes (adjustable)
Switching delay
Ambient conditions
Ambient temperature
Storage and transport tem-
perature
Process conditions
Process pressure
VEGAWAVE S 61
316L
316L
316L
Klingersil C-4400
plastic PBT (Polyester)
Silicone
316L
approx. 1500 g
600 N (135 lbf) longitudinal to the fork side
2 floating spdts (DPDT)
min. 10 mV / max. 253 V AC/DC
min. 10 µA DC, max. 3 A AC, 1 A DC
min. 50 mW / max. 750 VA, 54 W
AgNi or AgSnO and Au plated
If inductive loads or stronger currents are switched through, the gold
plating on the relay contact surface will be permanently damaged. The
contact is then no longer suitable for switching low-level signal circuits.
Floating transistor output
max. 55 V DC
max. 400 mA
<100 µA
min./max.
ON: approx. 0.5 sex. / OFF: approx. 1 sec.
-40 ... +80 °C
-40 ... +80 °C
-1 ... 25 bar/-100 ... 2500 kPa
Supplement
19