Operation - GreenWorks ST40L210 El Manual Del Propietario

OPERATION

W A R N I N G
Read and understand entire Operator's Manual for each optional attachment used on this power
head and follow all warnings and instructions. Failure to follow all instructions may result in
W A R N I N G
Do not allow familiarity with product to make you careless. Remember that a careless fraction of
W A R N I N G
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Hearing and/
or head protection may also be required depending on the type of attachment used and as
prescribed in the attachment's Operator's Manual. Failure to do so could result in objects being
thrown into your eyes and other possible serious injuries.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious personal
injury.
LOCK-OUT BUTTON(See Figure 5.)
The lock-out button reduces the possibility of accidental starting. The lock-out button is located
on the handle above the switch trigger. The lock-out button must be depressed before you pull
the switch trigger. The lock resets each time the trigger is released.
STARTING AND STOPPING THE TRIMMER (See Figure 5.)
To start the power head:
• Press the power button
• Press high speed button to increase speed depending upon grass condition
• Depress the lock-out button and squeeze the switch trigger
To stop the power head:
• Release the switch trigger
• The unit will power itself down after being idle for 1 minute
12