cascade corporation G Serie Guía Del Operador página 2

C
ONTENTS
Introduction
Safety Rules
Daily Inspection
Attachment Operation
Non-Sideshifting/ Sideshifting Clamps
Turnafork TM Clamp
Revolving Clamps
Load Handling
Fork Clamps
Drum Clamps
Turnaload TM Clamp
Clamps with Top Arm Shutoff
Clamps with Bottom Arm Shutoff
Revolving Clamps
Multi-Purpose and Bale Clamps
Load Troubleshooting
Safe Operation and Maintenance
OSHA Regulations
I
NTRODUCTION
Cascade G-Series Clamp attachments are available
in a wide variety of types designed to handle a wide
variety of loads.
About this Guide – This Guide is prepared to simplify
your understanding about efficient and safe Clamp
use and operation. Please read the Guide thoroughly
before operating the attachment. Be sure you know
and understand all operating procedures and safety
precautions. If you have any questions, or don't
understand a procedure, ask your supervisor.
Emphasize Safety! Most accidents are caused by
operator carelessness or misjudgement. You must
watch for poorly maintained equipment and hazardous
situations and correct them.
TURNAFORK
CL2469.eps
MULTI-PURPOSE
RIGID ARM CLAMP
CL2470.eps
i
TM
DRUM CLAMP
CL2471.eps
i
WARNING: Rated capacity of the truck/
1
attachment combination is a responsibility
2 of the original truck manufacturer and may
be less than shown on the attachment
3
nameplate. Consult the truck nameplate.
3
3 WARNING: Do not operate this attachment
unless you are a trained and authorized lift
3
truck driver.
4
4
4
CAUTION: This Guide shows load-handling
5
procedures for most products. Ask your
5
company or organization about any special
5 procedures for the loads you may be
handling.
6
7
7
8
8
Fork
Clamp
COTTON/BALE
CLAMP
CL2472.eps
CL2475.eps
REVOLVING
CLAMPS
CL2473.eps
6033702-R1 EN