Use & Operation - Honeywell HL Serie Manual Del Propietário

USE & OPERATION
CONTROL PANEL
HIGH
MID
LOW
1) Timer Control / Sleep Control
2) Fan Speed Control
3) Timer / Temperature Set Controls
FUNCTION BUTTONS
POWER CONTROL
The Power Control
outlet, the POWER indicator light will illuminate red indicating the unit is in a Standby Mode, ready
to be switched on at anytime. The air vent will automatically open when the unit is turned ON and
automatically close when unit is turned OFF.
MODE CONTROL
4 settings: Air Conditioning, Dehumidifying, Fan & Heating*.
The corresponding indicator light will illuminate to indicate the current mode setting.
• Air Conditioning Mode (COOL)
Adjust fan speed and air temperature to suit your desired comfort level.
Temperature setting range is 16°C - 32°C (60°F - 89°F).
•
Dehumidifying Mode (DRY)
Fan speed is preset to LOW.
Note: If the unit will be used mainly as a dehumidifier, do not connect the exhaust hose.
Continuous drainage is then necessary (refer to Continuous Draining for Dehumidifier Mode).
• Fan Mode (FAN)
For air circulation without air conditioner cooling.
(2) (4)
COOL
DRY
FAN
HEAT
turns the unit on and off. When the unit is plugged into an appropriate electrical
(3)
TIMER
C
o
F
o
SLEEP
4) Mode Control
5) Power Control
6) Indicator Lights
*Applicable for models with Heating feature only.
EN 6
(1) (6) (5)
POWER
TIMER
SLEEP
WATER
FULL