Honeywell HL Serie Manual Del Propietário página 6

INSTALLATION
It is important that the installation instructions below are followed for successful installation of this
Portable Air Conditioner. Please call Customer Support if you have any difficulties or queries
regarding these installation procedures.
1
5
Installation Kit:
1. Window Bracket Kit
2. Window Bracket Panel Adapter (1 Piece)
3. Plastic Pin
Installation Steps:
1. Window bracket panel adapter, exhaust hose and exhaust hose connector are pre-assembled
inside the package.
2. Adjust the window bracket as per width or height of your window and insert the plastic pin to fix at
the desired position. There is a hole where the exhaust hose will be inserted later. Make sure this
hole is not blocked.
2
x1
x1
(1 Set)
(1 Piece)
26.6", 33.1" to 49.6"
(67.5cm, 84cm to 126cm)
EN
3
x1 x1
6
4. Exhaust Hose Connector
5. Exhaust Hose
6. Drain Tube (refer to Continuous
Draining for Dehumidifier Mode)
Plastic Pin
Hole for Window Bracket
Panel Adapter & Exhaust Hose
3
4
x1
x1
(1 Piece)
(1 Piece)
(1 Piece)