Cleaning & Maintenance - Honeywell MN09 Serie Manual Del Propietário

Ocultar thumbs Ver también para MN09 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CLEANING & MAINTENANCE
Appliance Maintenance:
1.
Turn off the appliance before disconnecting the power supply.
2.
Always clean the appliance with a soft dry cloth.
Air Filter Maintenance:
The air filter should be cleaned every two weeks. Clean it as follows:
1.
Turn off the appliance and remove the air filter .
2.
Rinse it in lukewarm water. After cleaning, dry in a shaded and
cool place, then reinstall.
End of Season Storage & Maintenance:
If the appliance will not be used for a long time:
1.
Be sure to drain the left-over water condensation. Remove the lower drain plug and use a
shallow pan to collect the water (make sure to replace the drain plug when finished).
2.
To dry excess moisture, run the unit in Fan only mode for 30 minutes before storing.
3.
Turn off and unplug the air conditioner from the power supply.
4.
Remove the air filter and clean with water. Dry the air filter and then reinstall onto the unit.
5.
Disconnecting the Window Installation Kit:
Remove the Plastic Hose from the unit by pressing the release button located on the right side of
Remove the Plastic Hose from the unit by pulling away from the unit at the same time.
the Hose and then sliding the Hose to the right side.
Remove the Window Bracket, Window Bracket Panel Adapter and Hose Connector.
Remove the Window Bracket, Window Bracket Panel Adapter and Hose Connector.
It is recommended to store the Window Kit parts in a bag together with the Remote Control and
It is recommended to store the Window Kit parts in a bag together with the Remote Control and
placing them together with the air conditioner unit.
placing them together with the air conditioner unit.
If needed, you can clean the Window Kit with a damp cloth and water before storing. Make sure all
If needed, you can clean the Window Kit with a damp cloth and water before storing. Make sure all
parts of the Window Kit are dry before storage.
parts of the Window Kit are dry before storage.
6.
Cover the air conditioner with a cloth/ plastic bag before storage, to protect from dust and scratches
collecting on the surface of the unit.
7.
It is recommended to coil the power cord and store it away from the floor to ensure the cord is
protected from bents and creases.
8.
Store the air conditioner in a cool, dry place, away from direct sunlight.
EN
7
Air filter
Air filter
Air filter
Tabla de contenido
loading

Tabla de contenido