ProTeam ProGuard 15 Manual Del Propietário página 5

10. Lift up on the front of the pivot
plate and slide the 3/8" bolt through
the mounting bracket and pivot plate
holes (Figure G).
11. Secure the bolt with the supplied
3/8" lock nut.
Figure G
12. Turn cart upright onto its wheels.
13. Mount squeegee in the front fork as
shown in Figure H. Tighten using the
two oval hand knobs.
Figure H
ProTeam Front Mount Squeegee
ASSEMBLY
Mou
Bo t
Brac
ock ut
Front
Fork
Oval Hand
Knobs (2)
Squeegee
14. Thread the hose onto the tank
inlet, then place hose end onto the
squeegee inlet (Figure I).
Figure I
15. Press down lightly on the center
pedal lock at back of cart to lower
the squeegee onto the floor.
16. To raise squeegee, press down on
either side of the plate until pedal
locks under the pedal latch plate
(Figure J).
Pedal
Lock
Figure J
Tank Inlet
Hose
Squeegee
Inlet
LOCKED
POSITION
Pedal
Latch
Plate
Squeegee
Release
Pedal
5