Technical Data; General Safety Rules; General Power Tool Safety Warnings; Electrical Safety - Hilti TE 6-S Manual De Instrucciones

2. Technical data

Tool
Rated power
Rated voltage
en
Rated current input
Mains frequency
Weight of tool
Dimensions (l×w×h)
No load speed
Hammering speed (full hammering action)
Hammering speed (reduced hammering action)
Single impact energy (full hammering action)
Single impact energy (reduced hammering action)
Drilling dia. range in concrete/masonry
(hammer drill bits)
Drilling dia. range in wood (wood drill bits)
Drilling dia. range in wood (hole saws)
Drilling dia. range in metal (solid metal)
Drilling dia. range in metal (sheet metal,
max. 2 mm [0.08"] thick)
Drilling dia. range with thin-walled diamond core bits
(reduced hammering action)
Drilling performance in medium-hard concrete
Mechanical slip clutch
Vibration-absorbing grip and side handle
Right of technical modification reserved

3. General safety rules

3.1 General power tool safety warnings

WARNING! Read all safety warnings and all in-
structions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions
for future reference. The term "power tool" in the
warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS

3.1.1 Work area safety

a) Keep your work area clean and well lit. Clut-
tered or dark areas invite accidents.
2
Printed: 07.07.2013 | Doc-Nr: PUB / 5071103 / 000 / 00
TE6-S
650 W
120 V
5.4 A
50–60 Hz
2.8 kg (6.3 lbs)
320×215×75 mm (12.5×8.5×3.0")
0–1160 r.p.m.
0–5100 1/min.
0–2700 1/min.
1.8 Nm (J)
0.6 Nm (J)
"–1" dia.)
4–24 mm dia. ( 3 /
16
"– " dia.)
5–20 mm dia. ( 3 / 3 /
16 4
" dia.)
25–68 mm dia. (1"–2 5 /
8
"– " dia.)
5–13 mm dia. ( 3 / 1 /
16 2
"– " dia.)
5–22 mm dia. ( 3 / 7 /
16 8
" dia.)
25–68 mm dia. (1"–2 5 /
8
" dia.) = 28 cm
8 mm dia. ( 5 /
16
" dia.) = 45 cm
12 mm dia. ( 1 /
2
" dia.) = 49 cm
16 mm dia. ( 5 /
8
●
●
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.

3.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
3 /min.
3 /min.
3 /min.