Kenmore W10300914A Instrucciones De Instalación página 15

2. Pull direct wire through hole in terminal box.
Helpful Tip:
Select the proper size twist-on
connectors to connect your household
wiring to 16-gauge dishwasher wiring.
Insert wire ends into twist-on connector.
Do not pre-twist bare wire.
Twist connector.
Gently tug on wires to be sure both are secured.
3. Connect the wires as follows using twist-on connectors sized to
connect direct wire to 16-gauge dishwasher wire:
4. Form bare ground wire into a U-shaped hook. Wrap ground
wire hook clockwise around ground connector and under the
washer.
5. Securely tighten ground connector.
Ground wire
6. Tighten clamp connector or
conduit connector screws.
7. Reinstall terminal box cover
with wires inside terminal box.
The cover must be outside the box on
the left side.
8. Make sure no wires are pinched by
cover.
Ground wire Washer
Ground
connector
Screws
Option 2, Power supply cord method
1. Route the power supply cord so that it does not touch
dishwasher motors or lower part of dishwasher tub.
2. Pull the direct wire through hole in terminal box.
Helpful Tip:
Select the proper size twist-on
connectors to connect your household
wiring to 16-gauge dishwasher wiring.
Insert wire ends into UL Listed/CSA
Approved twist-on connector. Do not
pre-twist bare wire.
Twist connector.
Gently tug on wires to be sure both are
secured.
3. Connect the wires as follows using twist-on connectors sized to
connect power supply cord to 16-gauge dishwasher wire:
4. Form bare ground wire into a U-shaped hook. Wrap ground
wire hook clockwise around ground connector and under the
washer.
5. Securely tighten ground connector.
Ground wire
6. Tighten clamp connector or conduit
connector screws.
Ground wire Washer
Ground
connector
Screws
15