Specifications; Installation Requirements - Wolf E Serie Manual Del Usuario

SPECIFICATIONS

Installation Requirements

The oven can be installed in a standard or flush inset
application. Location of the electrical supply within the oven
opening may require additional cabinet depth. Refer to the
chart below.
Finish the edges of the opening. They may be visible when
the door is open.
For flush inset installations, a minimum
required on all sides. To ensure consistent
each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT
Single Oven
Double Oven
CABINET DEPTH
Standard Installation
Flush Inset Installation
Flush Inset (contemporary model)
TRIM (STANDARD INSTALLATION)
Top Overlap
Bottom Overlap
Side Overlap
|
4 Wolf Customer Care 800.222.7820
COMBINATION INSTALLATIONS
Wolf built-in ovens are designed and agency approved for
installation with Wolf cooktops, microwaves and warming
drawers only. The nominal width of the oven should match
the nominal width of the cooktop. A built-in oven cannot be
installed below a Wolf rangetop.
1
/ " reveal is For typical combination installations, refer to the Wolf
(6)
4
1
/ " reveals, Design Guide.
(6)
4
The single oven may be installed next to another E series
single oven. You must allow for a 1
oven openings. A separate inner wall is required for each
oven between openings.
250 lb
(115 kg)
400 lb
(181 kg)
24" min
(610)
25" min
(635)
1
25 / " min
(641)
4
5
/ "
(16)
8
1
/ "
(3)
8
3
/ "
(19)
4
1
/ " space between
(38)
2