Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5
Measure location for plumbing fixtures.
Measure and mark plumbing fixture locations on back
of shower wall. Using proper size hole saw, cut out
plumbing fixture holes from back side of panel.
7
2
1
3
Vertical beads
Apply beads of adhesive to the corner panel, then
trowel out. Apply beads to both inside vertical corners,
near the edges.
2
3
5
6
Trowel adhesive onto the drywall. Only apply adhesive
for one panel at a time. Install first panel. Press firmly
on wall panel to ensure complete contact. Repeat for
second panel.
8
Press corner panel into position. Use painters tape to
hold in position for 24 hours.
93967 Rev. A
Tabla de contenido
