Tabla de contenido
Idiomas disponibles
Idiomas disponibles
All parts and finishes of the Delta® shower unit are warranted to the original consumer purchaser to be free from defects in material and workmanship
for the time periods listed below. Delta recommends using a professional plumber for all installation and repair. Delta will replace, FREE OF CHARGE,
during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service for the time
period listed below:
•
The original consumer purchaser must notify the manufacturer in writing of any defect covered by the warranty. THIS WARRANTY IS THE ONLY
EXPRESS WARRANTY MADE BY THE MANUFACTURER. ANY CLAIMS MADE UNDER THIS WARRANTY MUST BE MADE DURING THE PERIOD
REFERRED TO ABOVE. MANUFACTURER MAKES NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. LABOR CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION, REPAIR OR REPLACEMENT AS WELL AS INCIDENTAL AND
CONSEQUENTIAL DAMAGES CONNECTED THEREWITH ARE EXCLUDED AND WILL NOT BE PAID BY THE MANUFACTURER. Some states do
not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations
or exclusions may not apply to you. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state. This
warranty is void for any damage to this product due to misuse, abuse, neglect, accident, improper installation, modifi cation, unauthorized repair, or any
use violative of instructions furnished by us.
IMPORTANT: Shower wall units are designed to be installed in new and/or existing construction. For the best protection of the unit, it is
recommended that the unit not be removed from the packaging until ready for installation.
• Read complete instructions before beginning installation
• These instructions include suggestions for plumbing installation that we believe to be reliable. Local building codes vary and could supersede those
suggestions. If you are not confident in your ability to perform these tasks, contract out those tasks you need help with or use a professional installer.
• Confirm that your model will fit in intended location and plumbing fixtures are located where required before beginning installation.
• Walls must be solid, plumb and square. This shower kit has been designed with some adjustability for minor alignment problems, but a poor foundation will
result in a poor installation.
• Use drop cloth or cardboard to protect base from damage during installation.
• DO NOT install in areas where temperature may drop below 32ºF (0ºC).
• Allow product to reach room temperature for 30 minutes before installation.
• Two people recommended to install this product.
• Wall should be 1/2" (1.3 cm) moisture-resistant drywall. Surfaces must be free of dirt and other residue. Painted surfaces must be sanded.
• DO NOT install panels over ceramic tile, plywood, or wallpaper.
• Dry fit all panels before applying adhesive.
• Apply adhesive to panels using 1/16" x 1/16" x 1/32" u-notched trowel.
• Follow manufacturer's instructions for adhesive dry time and ventilation precautions.
• Rough plumbing and base must be installed before panel installation.
• Check drain fixture lengths as some drain products require a drain and waste assembly extension.
• When disassembling unit, take care not to damage edges of unit.
93967 Rev. A
LIMITED WARRANTY
Shower Walls Limited Warranty
Non-residential or commercial application - 1 year •
BEFORE YOU START
Residential applications - 1 year
2
Tabla de contenido
