Sony Mavica MVC-FD91 Manual De Instrucciones página 11

POWER lamp (17, 21)
ACCESS lamp (17, 21)
LCD screen
FINDER/LCD switch
Slide to change the
viewfinder or LCD
screen.
SPOT METER
button (47)
Press to change the
Complete photometry
or Spot light-metering
mode.
Self-timer
Select " " with the control button,
then press it.
About 10 seconds after you press
the shutter button, the subject is
recorded.
Exposure
Select " " or "
LCD screen with the control button,
then press it to select the desired
value.
+EV: To raise the exposure value
(brighten the picture)
–EV: To lower the exposure value
(darken the picture)
Adjustable in a range of –1.5 EV to
+1.5 EV in steps of 0.5 EV.
" on the
Hook for strap
Attaching the shoulder
strap
FLASH button
Auto-flash is set at the factory.
Each time you press the button,
the flash mode changes as
follows:
Auto-flash (no indication) n
Forced-flash
No flash
In Auto-flash mode, the flash
radiates automatically according
to the brightness of the sur-
roundings. The subject must be 1
5/8 feet to 8 1/3 feet (0.5 m to
2.5 m) away. The flash will work
at 1/60 to 1/1500 shutter speed.
When you record using the flash
and conversion lens (not
supplied), an eclipse (shadow)
may occur. To use the flash or
change the flash mode, slide
OPEN (FLASH) to lift the flash
up. (9)
Floppy disk
slot
FLASH/
CHARGE
lamp
n
n Auto-flash
11-GB