Idiomas disponibles
Idiomas disponibles
Cut tie wraps holding regulator and side burner valve in place underneath grill head control panel. Be
careful not to cut igniter wires or the tie wraps holding the igniter wires in place.
With the aid of an assistant, lift and place grill head onto cart. Grill head sides go over attachment
tabs on cart. Make sure that side burner valve hangs outside the cart, and that regulator and igniter
wires hangs inside the cart. Attach head to cart with 4 screws as shown.
3/16-24x 1/2" Screw
Qty. 4
Burner Box
Cabinet
Side Burner Shelf
Loosen the three screws attached to the right panel of the burner box 3 to 4 turns as shown. Hang
the side burner shelf by the slotted holes in its side onto the loosened screws. Fasten the side burner
shelf from its bottom as shown with two 1/4-20 x 1" screws. Tighten the 3 previously loosened
screws.
Loosen
1/4-20x 1 " Screw
Qty.2
Side Burner Shelf
19
1/4-20 x 1" screw
