Recalling Values From Memory - PiC indolor Travel Check Manual De Instrucciones

4. When the measurement is completed, systolic pressure, diasto-
lic pressure and pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically stored into the
pre-designated memory zone.
This monitor will re-inflate automatically to approximately 220
mmHg if the system detects that your body needs more pressure
to measure your blood pressure.
real fuzzy
reflate
note:
1. The measurement has to be taken in a silent room.
2. This monitor automatically switches off approximately 1 minute after last key operation.
3. To interrupt the measurement, simply press any key button under the display; the cuff will deflate
immediately.
4. Please refer to the following paragraph for information on memory functions.

recalling Values from Memory

1. T he Monitor has two memory zones (1 and 2). Each zone can store up to 60
All symbols
measurements.
2. To read memory values from a selected memory zone, use the "memory areas
switching Key" to select a memory zone (1 or 2) from which you want to recall
values from. Then, press the "M" key, and the values will be shown on the LCD
1-p
display with an assigned memory sequence number.
3. The monitor will display an average of the previous measurements first. Every new
press of the "M" key calls for one set of prior values stored. Latest memory will
be recalled first. The calculated average will be applied to a maximum of the last
3 memories.
Re-inflate
IHB
MEM 00
mem clear
mem recall
2-p
Re-inflate
real fuzzy
mem clear
explain LCD
00
29
mem average
IHB
MEM 00
OK
explain LCD
mem zones
AVG
mem average
mem zon