Technical Data; Technical Description; Miniman-100 - PLYMOVENT MiniMan-100 Instrucciones Para El Uso

MiniMan
MiniMan
The PlymoVent "MiniMan
efficient extractor for dust, welding fumes, soldering fumes,
oilmist, fumes from solvents etc. The inner tubes are coupled
by a gas spring (standing arm) or balancing strap (hanging
arm). The construction allows a stepless positioning within
the operating range. The MiniMan has an extremely smooth
movement. The MiniMan reaches high above its mounting
height and is manoeuvrable through 360°. Both inner and outer
tubes are made of light, smooth aluminium tubing. This not only
makes the arm rugged but also minimizes the total weight and
noise level, even at high extraction rates. As an option there is
a shut-off damper on the outer tube with a rubber sealing lip to
minimize the noise level when the damper is shut. The shut-of
damper control knob has several distinct positions which makes
it possible to fine tune the airflow through the arm.
advantages
• CLEAR-THRU design- all components on the outside of the
tubes, resulting in less pressure drop.
• Supplied assembled - thus redusing installation time and
cost.
• Gas springs/rubber strap which balance the arm in any
position - giving very smooth movement caracteristics.
• Easy flexible hose removal - allowing easier cleaning or hose
replacement.
• In diameter; Ø 100mm, Ø 4" and two lengths 1,5 and 2,1
m ( 5' and 7') - for all needs.
• External joints for easy adjustement.
• Rubber sealed damper with accurate damper control (ac-
cessory). Less noise when the damper is shut and stays in
position at any airflow.

Technical data

MMS-100-15(5')
MMS-100-21(7')

021213/0 MiniMan-100

extraction arm is a very flexible and
"
MMH-100-15(5')
MMH-100-21(7')

Technical descripTion

© Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from Plymovent AB. Plymovent AB reserves the right to make design changes.
delivery
The arm is delivered completely assembled. To ac-
complish a variety of mounting solutions it can be
combined with stanchions PA-100.
Prod.
Max.
no.
working
radius
MMS-100-1,5
MMS-100-2,1
MMH-100-1,5
MMH-100-2,1
BSAB no: T0.31
Ser.no: MM/TB
Date: Aug-00
Replace:
hose rec.
diameter airflow m
mm, in
m, ft
1,5, 5' 200 - 500, 118 - 294
100, 4"
2,1, 7' 200 - 500, 118 - 294
100, 4"
1,5, 5' 200 - 500, 118 - 294
100, 4"
2,1, 7' 200 - 500, 118 - 294
100, 4"
Miniman/100/USA/CAN/2/14
/h, cfM
3
EN - 2