Pulsar ACCOLADE XQ38 Manual Del Usario página 10

Press and hold down the М (3) button to enter the
=
main menu.
Select the desired palette with the UP (2)/DOWN
=
(5) buttons.
Confirm your selection with a brief press of the M
=
button.
Black Hot palette (white colour corresponds to
low temperature, black colour – to high
temperature)
Red Hot
Red Monochrome
Rainbow
Ultramarine
Violet
Sepia
Switch between the palette selected in the menu
and the basic palette with a short press of the
UP (2) button.
Selecting calibration mode
Calibration
There are three calibration modes: manual (M),
semi-automatic (SA) and automatic (А).
Press and hold down the М (3) button to enter the
=
main menu.
Select the desired calibration mode with the UP
=
(2)/DOWN (5) buttons.
Confirm your selection with a brief press of the M
=
button.
More details in the section "Sensor calibration".
=
Wi-Fi
Wi-Fi setup
settings
This menu option allows you to set up your device
for operation in a Wi-Fi network.
This menu option allows you to set a password to
Password
access your thermal imager from an external
setup
device.
12345
The password is used to connect an external device
(i.e. smartphone) to your thermal imager.
Press and hold down the М (3) button to enter the =
main menu.
Select the menu option with the UP (2)/DOWN (5)
=
buttons.
Press briefly the M button to enter submenu
=
"PAS".
The default password "12345" appears on the
=
display.
13
Set the desired password with the UP (2)/ DOWN
=
(5) buttons (button UP to increase value; button
DOWN to reduce). Switch between digits with a
short press of the M button.
Save the password and exit the submenu with a
=
long press of the M button.
Access Access level setup
level setup
This menu option allows you to set required access
level of the Stream Vision application to your
Master
device.
Guest
Access level Owner. The Stream Vision user has
=
the complete access to all device's functions.
Access level Guest. The Stream Vision user has
=
the access only to the real time video stream from
the device.
Settings
The following settings are available:
Language
Selecting interface language
English
Press and hold down the М (3) button to enter the
=
main menu.
Select option "Settings" with the UP (2)/DOWN
=
(5) buttons. Press briefly М to confirm.
Select option
=
Press briefly М to confirm.
=
Select one of the available interface languages
=
with a short press of the UP/ DOWN buttons:
English, French, German, Spanish.
Switch between languages with a short press of
=
the M button.
Save selection and exit the submenu with a long
=
press of the M button.
Date setup
Date
Press and hold down the М (3) button to enter the
=
main menu.
Select option "Settings" with the UP (2)/DOWN
=
(5) buttons. Press briefly М to confirm.
Select option "Date" with UP/DOWN.
=
Press briefly М to confirm.
=
"Language" with UP/DOWN.
14