Elite TIG AC/DC 225 Manual De Usuario página 64

Final current : It is the current with which the welding arc will end. When
the trigger is no longer depressed in 2T, or the trigger is depressed again
in 4T, the current will gradually decrease from the working current until it
reaches the final current and is interrupted, within the period configured in
the descent ramp or time of descent .
Ramp up or rise time : Configurable from 0 to 10s. It is the time in which,
since the arc starts, the current rises from the initial current to the working
current.
Ramp down or fall time : Configurable from 0 to 10s. It is the time when,
after the trigger is released from 2T, or the trigger is pressed again at 4T
to end the weld, the current drops from the working current
current.
The order in which the operations configured in the TIG welding curve are executed is as
follows:
FOR 2T:
FOR 4T:
www.ELITETOOLS.co
to the final
20
Keep Working