In Tig Welding Process (Hf Or Lift Arc) - Elite TIG AC/DC 225 Manual De Usuario

Hot Start
increases current in an adjustable ratio.
Arc Force
by automatically raising or lowering the arc voltage, the intensity of the arc force can
be adjusted.
Inductance

2. In TIG welding process (HF or Lift ARC):

1
3
www.ELITETOOLS.co
is a technology that makes it easy to ignite the electrode. Momentarily
Facilitates the welding process by correcting wrong hand movements
regulates the heat input to the material and the softness of the arc.
Use the push button on the panel
TIG AC and DC:
Turn knob to adjust the working current (current to be
used to apply the weld).
The display
Use the push button on the panel
operating mode, between 2T ( 2-touch: hold the torch trigger
pressed while welding) and 4T ( 4-touch: press the torch
trigger to weld, press again to stop welding).
will show the adjusted current value.
9
to select between
1
3 to select the torch
Keep Working
18