Stihl HL 100 Manual De Instrucciones página 38

Definitions
1. Loop Handle
For easy control of machine during
operation.
2. Barrier Bar
Helps maintain clearance between
cutting attachment and feet and legs
of operator.
3. Carrying Ring
Connects the hedge cutter to the
harness.
4. Slide Control
For starting throttle, run and stop.
Keeps the choke partially open
during starting and switches off the
ignition to stop the engine.
5. Throttle Trigger Interlock
Must be depressed before the
throttle trigger can be activated.
6. Throttle Trigger
Controls the speed of the engine.
7. Choke Knob
Operates choke to enrich the
mixture for easier engine starts.
8. Spark Plug Boot
Connects the spark plug to the
ignition wire.
9. Air Filter Cover
Covers and protects the air filter
element.
HL 100
10. Fuel Tank
For fuel and oil mixture.
11. Machine Support
For resting the machine on the
ground.
12. Cutting Blades
Steel blades for cutting hedges and
shrubs.
13. Blade Scabbard
Covers and protects cutting blades
when hedge cutter is not in use.
14. Blade Drive Gear
Converts rotary movement of angle
drive into reciprocating movement
of cutting blades.
15. Angle Drive
Transmits rotary movement of drive
shaft to the blade drive gear.
16. Drive Tube (Boom)
Encloses and protects the drive
shaft between the engine and
gearbox.
17. Sliding Sleeve
Locks and unlocks the cutter bar
adjusting mechanism.
18. Adjusting Lever
Used to set cutter bar to the
required angle.
English / USA
19. Quadrant
Locks the cutter bar in the required
position.
20. Fuel Filler Cap
For closing the fuel tank.
21. Carburetor Adjusting Screws
For tuning the carburetor.
22. Fuel Pump
Provides additional fuel feed for a
cold start.
23. Starter Grip
The grip of the pull starter, which is
the device for starting the engine.
24. Muffler
(with spark arresting screen)
Attenuates exhaust noises and
diverts exhaust gases away from
operator. The spark arresting
screen is designed to reduce the
risk of fire.
37