Specifications; Cutting Blades; Special Accessories - Stihl HL 100 Manual De Instrucciones

English / USA

Specifications

EPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category A = 300 hours, B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
STIHL single cylinder four-stroke
engine with gasoil lubrication
Displacement: 1.92 cu.in (31.4 cm
Bore: 1.57 in (40 mm)
Stroke: 0.98 in (25 mm)
Power to ISO 8893:
1.36 bhp (1 KW)
Idle speed: 2800 rpm
Cut-off speed: 10500 rpm
38
Valve Clearance
Inlet valve: 0.004 in (0.10 mm)
Exhaust valve: 0.004 in (0.10 mm)
Fuel Tank Capacity
1.12 US pt (0.53 l)
Spark plug (resistor type),
NGK CMR 5 H
Bosch USR 7AC
Electrode gap 0.028 in (0.7 mm)
Rewind Starter
Starter rope: 0.12 in dia., 33.5 in long
(3.5 mm dia., 850 mm long)
Weight
Powerhead wth drive tube (without
cutting attachment)
HL 100: 10.8 lbs (4.9 kg)
HL 100 K: 10.1 lbs (4.6 kg)
Cutting attachment
- with 0° cutter bar:
3.5 lb (1,6 kg) or 4.4 lbs (2.0 kg)
3
)
depending on version
- with adjustable cutter bar:
4.4 lb (2,0 kg) or 5.1 lbs (2.3 kg)
depending on version

Cutting Blades

Double-edged for bidirectional cutting
Bar length 20 in (500 mm)
Sharpening Angle
45° to horizontal

Special Accessories

Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
HL 100