Kenwood TK-2180 Manual De Instrucciones página 44

Press and hold the A or # key to delete all entered
characters.
• "
name.
4 Enter the desired number using the DTMF keypad or the
selector. When using the DTMF keypad, simply enter
the desired number, followed by the S key to confirm the
entry. When using the selector, rotate the selector to
select a digit, then press the C> key to confirm the digit
and move the cursor to the right. Repeat this operation
until the complete number is entered, then press the S
key to confirm the entry.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
• "
entered number.
5 Press the S or
number in the Autodial list.
• Press the A or # key to cancel the entry.
• If you are overwriting a previous entry, "
on the display. Press the S or
entry, or press the A or # key to cancel.
■
D S
IALING TORED
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Rotate the selector, press the <B and C> keys, or press
the appropriate DTMF key (01 ~ 32) to select your
desired Autodial list number.
• The stored entry appears on the display.
3 Press the PTT switch to make the call.
34
" appears on the display after confirming the entered
" appears on the display after confirming the
key to store the entered name and
DTMF N
UMBERS
key to overwrite the
" appears