Patient Assistant specifications
Dimensions: Approximately 10 cm x 4 cm x 1 cm (4 in x 1.5 in x 0.4 in)
Power source: Non-replaceable lithium coin cell battery
Battery longevity (service life): When used at room temperature, a Patient Assistant button can
be pressed a minimum of 200 times before the battery is depleted.
Industry Canada compliance information
This Category II radiocommunication device complies with Industry Canada Standard RSS-310.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Declaration of Conformity
Medtronic declares that this product is in conformity with the essential requirements of Directive
1999/5/EC on Radio and Telecommunications Terminal Equipment. For additional information,
contact Medtronic at the telephone numbers and addresses provided on the back cover of this
manual.
Transport and storage conditions
•
Keep the Patient Assistant at -25 °C (-13 °F) to 50 °C (122 °F) and less than 93% relative
humidity when transporting it for 24 hours or less.
•
Keep the Patient Assistant at 15 °C (59 °F) to 30 °C (86 °F) and less than 93% relative humidity
when storing it for greater than 24 hours.
Using your Patient Assistant
13